Car components

The simulators with car components, are steps to studying and understanding the car systems before entering into the real car systems.


It also enables to simulate states, conditions and faults that cannot be performed in a real car.


  • Basic hydraulics panels 
  • Advanced hydraulics panels
  • Basic electro-hydraulics panels
  • Advanced electro-hydraulics panels
  • Programmable Logic Controller (PLC) panel
  • Multi I/O unit and fault​ insertion panel
  • Basic​ pneumatics panels
  • Advanced pneumatics panels
  • Basic electropneumatic panels
  • Advanced electropneumatic​ panels
  • Programmable Logic Controller (PLC) panel
  • Multi I/O unit and​ fault insertion panel
The refrigeration and air conditioningtraining systems are designed to provide students with the fundamental and advanced training programs in basic and industrial refrigeration and air conditioning.

The training system exposes the student to various systems and real components.The training systems providea comprehensive view of entire refrigeration and air conditioning systems.
The training program covers actual components and their interconnection, related functions, operation, diagnosisand repair methods through safe,hands-on practical activities.

The system is based on a refrigeration and air-conditioning base with five exchangeable panels.
Refrigeration and Air-Conditioning
For studying and practicing the mosts ophisticated electronics systemsin a modern car by viewing the cardevices, signals, performing measurements and analyzing results.

​The system includes a 19” LCD display shawing the components under test,signal and measurement values.Every connection done by thestudent is identified by the systemand the student gets feedback aboutthe connection.

​Each panel is accompanied by a rich simulation program and courseware.
The OPCOM course provides efficient, practical training exercises for the study of important characteristics of fiber optic cables, digital and analog laser transmitters and receivers for 850nm multimode (MM), 1310nm and 1550nm single mode (SM) optical transmission, optical splitters and wave-division multiplexing devices.
The Modern Communications product line is designed to provide practical training for engineers and technologists in the fundamentals of analog and digital communications that are the basis of modern communications and telecommunication systems.

​The prime objective is to study the principles of operation of various communications techniques and their effect on real life signals suchas speech, music, data and video.
Electronics with EB-3000 Universal Trainer

Motors,
Generators
and Inverters

Analog 
Electronics

Semiconductor
Devices

EB-3121  Ohm and Kirchhoff Laws and DC circuits
EB-3122  Norton, Thevenin and superposition
EB-3123  AC circuits, signals and filters
EB-3124  Magnetism, electromagnetism, induction and transformers

Hydraulics is the hybrid technology, which combines oil hydraulics, electro-hydraulics, programmable logic controllers (PLCs) and/or computers in complex hydraulic power systems.

​The training system covers the latest developments in the field, especially as related to the widespread use of advanced electronic control circuits, PLCs and computers in hydraulic power systems.
The simulators are panels with real components demonstrating the behavior and signals of car systems.

Each simulator has graphics LCD display, fault insertion unit, simulation program selecting unit, various simulating programs controlled by an internal controller, two channel scope and test points.

​Every simulator can work with or and without PC.
Autotronics Simulators with Car Components
Networks and Switching Systems
Modern Communications

Theory and experiment manual and
courseware for every card.

Each plug-in card has its own controller for
automatic identification by the main platform,
for saving its required configuration and for
automatic self-diagnostics while plugging it in.

The plug-in cards are connected to the trainer
through a 48-contact, very low resistance
industrial connector.

The system provides
USB wire communication
with the PC.

​​

Degem Systems product line is aimed for professional training for vocational school, technical colleges, universities and industry.

Each training covers a complete technology subject and comes with manual that covers the required theory, experiment procedure, Preparation questions before the experiment and summary questions.

Many of the trainers include fault insertion for troubleshoot exercises.
Most of the trainers accompanied with Interactive courseware connected via CML to the instructor computer.

Degem Systems product line cover the leading topics:

The training system includes a set of modular mechanical elements to build various antennas, a transmitter unit and a detector unit. All the accessories are packed in a convenient carrying case.


  • RF and tone generators included
  • Directional coupler, matching stub, forward/ reverse meter
  • and goniometer are also provided
  • Several experiments with different types of antennas
  • Antenna fabrication kit
  • Measure forward & reverse power
  • SWR measurements
  • Fully documented student workbook and operating manual
The Networks and Switching Systemsare for learning fundamentals of modern electronic switching for both conventional Public Switched Telephone Networks (PSTN) and Voice over Internet Protocol (VoIP).

​A real electronic exchange, which is controlled by the student’s PC, provides practical exercises to reinforce the theory learned.

​Each experiment is accompanied by detailed procedures to guide the student with a minimum of instructor intervention.

EB-3131  ​Inverter, non-inverter, summing, difference operational amplifiers
EB-3132  Comparators, integrator, differentiator, filter operational amplifiers
EB-3135  Power amplifiers

EB-3136  Power supplies and regulators

​EB-3137  Oscillators, filters and tuned amplifiers

EB-3125  Diodes, Zener, bipolar and FET transistors characteristics and DC circuits
EB-3126  Bipolar and FET transistor amplifiers

EB-3127  Industrial semiconductors – SCR, Triac, Diac and PUT

EB-3128  Optoelectronic semiconductors – LED, phototransistor, LDR, 7-SEG

​EB-3129  Electrical control components & circuits

Solar Energy Training System


This course introduces the student to the green energy source – the sun. It exposes the studentto solar energy, its concepts, practical applications and uses, and the ecological benefitsof utilizing solar energy. The student is introduced to issues relating to energy derivation,conversion and storage, with emphasis on solar generated energy.



Pneumatics Systems and Automation
Autotronics Simulators for Diagnostics and Troubleshooting
Antenna Training System
  • eAT-201 Engine starting theory
  • eAT-202 Diesel engine theory
  • eAT-203 Air brake theory
  • eAT-204 Brake systems theory
  • eAT-205 Drive train system theory
  • eAT-206 Engine theory
  • eAT-207 Heating, ventilation and air conditioning
  • eAT-208 Engine performance theory
  • eAT-209 Shop safety and tools theory
  • eAT-210 Steering and suspension theory
  • eAT-215 Lubrication system theory
  • eAT-216 Cooling system theory
  • eAT-217 Automatic Trip-Tronic gearbox
  • AT-3062 Diesel engine operation and troubleshooting
  • exercises software
  • Scattering measurement
  • Attenuation measurement
  • Splitter measurement (loss, splitting ratio, isolation)
  • WDM measurement (loss, filtering, isolation)
  • Dispersion measurement
  • Optical sources and transmitter concepts
  • Power, rise/fall time
  • Data Transmission (Ethernet, BER Measurement)
  • Optical detector and receiver concepts
  • Photodiode current measurement
  • WDM – wavelength division multiplexing
  • Switched telephone network architecture
  • Public switching hierarchy
  • Transmission network
  • Signaling concepts
  • Private exchanges
  • Telephone network trends
  • IP networks

Hydraulics Systems

CNC Machines

Autotronics Simulation Software
The Antenna Training System is an ideal training equipment to teach the important fundamentals of antennas as applied to modern communications systems. 

The Antenna Training System has been specially designed for engineering colleges and technical training centers. It is very useful for practical verification of antenna operating characteristics by students.

All of the necessary measuring equipment and accessories are provided.

The workbook provides theoretical concepts and detailed experiment procedures for each type of antenna.

Microprocessor/
MicrocontrollerTechnology

Automotive

EB-3161  ​AM transmitter receiver
EB-3162  FM transmitter receiver

EB-3163  Digital communication modulation demodulation

EB-3164  Digital communication signal conversion

​EB-3165  Optical communication and fiber optic

Telecommunication

Various electronics study programs for
Mechatronics, Autotronics, Electrical
Machines and Electricity using EB-3000 and
its plug-in experiment cards are available.


Solar Water Heating Energy Training System


This course introduces the student to the application of solar energy to heat water. Itemphasizes the environmentally friendly nature of solar energy. The student is acquaintedwith greenhouse and thermodynamic effects. Also discussed is the effect of heightdifferences between water reservoirs in connection with power generation.

​The system courseware and experiments will enhance the students’ interest and curiosity.They also establish an awareness of the technologies involved in the subject discussed, andthe interaction between scientific phenomena, these technologies and common applicationsrelating to solar water heating energy conversion.


Fault insertion in a real vehicle can be controlled by the courseware at the student’s workstation (PC).

The system’s can be adapted according to any type of vehicle equipped with an ECU that supports the OBDII protocol.

A proprietary interface can insert up to 16 different faults by the various signals that connect to the ECU.

The customer complaint is displayed on the student’s monitor and instructions in the courseware guide the student through the correct diagnostic procedure to find the fault.
Optical Communication and Fiber Optics

Digital
Electronics

EB-3151  ​AND, OR, NOT, NAND, NOR, XOR logic components & Boolean algebra
EB-3152  Decoders, multiplexers and adders

EB-3153  Flip-flops, registers, and counters sequential logic circuits

EB-3154  555, ADC, DAC circuits

​EB-3155  Logic families

​​
Hydro Energy Training System


This course introduces the student to the green energy source – hydro energy. It exposes the student to hydro electric power, its concepts, practical applications and uses, as well as the ecological benefits of utilizing hydro energy.
The student is introduced to issues relating to energy derivation, conversion and storage, with emphasis on hydro electric energy. The student is also made aware of the limitations and advantages of hydro energy as an energy source and the dependence of energy yield on water velocity or height.


Pneumatics is the hybrid technology, which combines pneumatics, electro-pneumatics, programmable logic controllers (PLC’s) and/or computers for the control of complex pneumatic and electro-pneumatic power systems.

​The training system covers the latest developments in the field, especially as related to the widespread use of advanced electronic control circuits, PLC’s and computers in pneumatic power systems.
The interactive e-learning software program is ideal for autotronics training. It is designed both as a teaching aid for the instructor and a self-paced, self-monitored tutorial for the student to reinforce learning.

​The interactive format of the program features sound and animated graphics that motivate the student’s interest in an active learning environment, while introducing automotive operations and components.

Electronics EB-3000 Plug-In Cards
ALTERNATIVE ENERGY
Milling and Lathe machines for developing basic and advanced skills on the subject of CNC, Milling and turning, programming in G&M code, running a simulation, and manufacturing.

The systems come with software,which allows the user to create and edit a G-Code file, that later can beused to run as a simulation or as an actual processing job.

The systems can work also under professional design software like Solidcam, Solidworks and MasterCam.

Autotronics Troubleshooting Faults in a Real Car

The system contains also: 3.2” color graphic
display with touch panel, keyboard,
10 relays for inserting faults.

The system includes: 5- power supplies
(+12V, +5V, -5V, -12V and variable -12V to
+12V), 2 voltmeters, ammeter, frequency
counter, logic probe, logic analyzer,
2-channel digital oscilloscope,
function generator
(sine, triangle and
square signals).

EB-3000 supports every stage of electronics
study, which is a must for almost every
profession such as: electronics, electricity,
mechatronics, automotive, instrumentation,
process control, etc.

EB-3141  Analog, PWM DC motor speed control, step motor control, generators
EB-3142  Motor control – optical, Hall effect, motor closed control
EB-3143  
AC-DC and DC-AC conversion circuits

EB-3144  3 Phase motor control

​EB-3145  Electrical accessories module

EB-3146  Ignition and charging module

Electricity and Electrical Circuits

dddd
Wind Energy Training System


This course introduces the student to the green energy source – the wind. It exposes thestudent to wind energy, its concepts, practical applications and uses, and the ecologicalbenefits of utilizing wind energy. The student is introduced to issues relating to energyderivation, conversion and storage, with emphasis on wind generated energy. The studentis also made aware of the limitations and advantages of wind as an energy source and thedependence of energy yield on wind velocity and direction.



EB-3170  CAN-BUS Systems

The Alternative Energy training systems introduces the students to the green energy sources, practical applications and uses.

​The system courseware and experiments will enhance the students’ interest and curiosity.They also establish an awareness of the technologies involved in the subject discussed, and the interaction between scientific phenomena, technologies and common applications relating to alternative energy conversion.

Follow Us :

EB-3191  ​Introduction to microprocessors and microcontrollers
EB-3192  Introduction to 32 bit microprocessors and ARM

EB-3193  Introduction to 16 bit microprocessors and AVR

EB-3194  Introduction to embedded Linux with ARM

​EB-3198  Programmable logic device